Setting The Language - AIPTEK PocketDV 4100 User Manual

€) Setting the language
When you power on the camera for the first time, the LCD
display may not be shown in your local language. You can
set the LCD display language using the method below:
(i) Set the Mode Dial to the Settings
( y) mode, and the Settings menu will
display on the screen.
(2) Use the Up or Down ( * ) button to
highlight the LANGUAGE item.
AUTO OFF 10 MIN
A/V OUT NTSC
| LANGUAGE ENGLISH |
TIMESTAMP OFF
DATE 01/01/2004
(3) When the LANGUAGE item is
highlighted, press the Enter (enier)
button to enter the sub-menu. In the
sub-menu, use the Up or Down ( * )
button to select a suitable language,
and then press the Enter (enter)
button to adopt.
LANGUAGE
I ENGLISH |
DEUTSCH
(4) After all settings are done, you are
ready to use the camera. Set the
Mode Dial to other modes according
to your purpose.