Table of Contents
Advertisement
Troubleshooting
When using the camera:
Q1 The camera can not be switched on normally.
A: 1) The batteries may be out of power. Please change the batteries.
2) Make sure the batteries are correctly installed.
Q2 Can not take pictures or record video clips.
A: 1) The storage media may be full. Please free some space from the CF card
or the internal memory.
2) Check if the camera is recharging the flash strobe.
3) If the LCD screen displays "MEMORY ERROR" or "CARD ERROR"
message, please set the camera to Settings mode and format the storage
media.
Q3 I did not delete the pictures and video clips, but cannot find them in
the memory.
A: Check if you insert a CF card after taking pictures or recording video clips.
The camera will use the card as the main storage media. Files previously
stored in the internal memory will be inaccessible until the card is removed.
Q41 cannot use the flash strobe.
A: If the battery power is low, the flash strobe may be disabled due to insuf
ficient voltage. Please change batteries immediately.
Q5 The pictures taken appear too blurred.
A: Please adjust the focus as appropriate.
Q6 The pictures or video clips taken appear too dark.
A: Make sure the environment of shooting or recording has adequate light. Or
you may consider using flash strobe when taking pictures.
Q7 The camera cannot operate after I remove/insert the CF card.
A: Please do not remove or insert the CF card while the camera is powered on.
Doing so may cause the camera to shut down abnormally.
39
Advertisement
Table of Contents
