Powering On Or Off / Using A Memory Card; Setting Language; Reading Screen Icons - AIPTEK 3D i2 User Manual

Powering on or off / Using a memory card

Press the power button to power on the unit.
Press and hold down for 2 seconds to turn off
the unit.
Insert a SD/SDHC card (sold separately) into the slot
until it clicks into place. To remove the card, push the
card to release it and then pull it out gently.
If the unit cannot be powered on, please check the followings:
1) The battery is correctly loaded;
2) The loaded battery has enough power.

Setting language

1
Push the Joystick to the right (
2
Select the "Language" item and Press OK (
3
Move the Joystick up/down (
language. Press the OK button (

Reading screen icons

Recording mode:
: 2D
: 3D
Menu button indicator
(Push the joystick to
the right to enter the
Menu setting)
) to bring up menu.
) to select your local
Preview mode icon
).
Storage:
: internal
: memory card
03:27:50
3
5-way Joystick
Battery life:
: full
: moderate
: low
: empty
Zoom bar
Remaining
recording time