Sharp mz-800 Owner's Manual page 156

(3) Plug the connector previously unplugged in Step 1 into the connector on the main unit. Replace
the expansion slot cabinet and secure it with the three screws, Close the connector latches to firmly
hold the connector.
Connector latch
Note:
If the cable is trapped between the cabinet and main unit, the expansion slot cabinet cannot be
replaced properly.
7.2.4 Joystick
Joysticks made by Atari Inc., or their equivalents can be used with the MZ-800.
(ee)
JOYSTICK 1 JOYSTICK 2
CweIAwaen= CeOIyrAnEevn—
Connector
7-11
—