Sharp mz-800 Owner's Manual page 132

PCOLOR
Format
PCOLOR 0
1
Abbreviated Format
Example
| 3
PC;
The PCOLOR command specifies the colour to be used for the printout of charac-
ters or graphics. This command can be entered in either the text mode or graphics
mode. The available colours and the corresponding colour numbers are listed below.
0: Black
1: Blue
2: Green
3: Red
10 PCOLOR 1................... Sets the pen colour to blue,
PSKIP
Format
Explanation
Example
PSKIP <number of lines>
Abbreviated Format
PS.
The PSKIP command feeds the paper by the specified <number of lines> forward
when the specified value is positive and feeds it by the specified <number of lines >
backward when the value is negative. <number of lines > must be an integer from
—20 to 20. This statement is valid only in the text mode.
10 PSKIP 12.,
20 PSKIP —6.
.. Feeds the paper 12 lines forward.
.. Feeds the paper 6 lines backward.
PAGE
Format PAGE <number of lines>
Abbreviated Format
Explanation
Example
PA.
The PAGE command specifies the number of lines per page. <number of lines>
must be an integer from 1 to 72. The PAGE command also sets the current page
position as the first line of the page. This statement can only be executed in the
text mode.
LO PAGE 20 nasser Sets the number of lines per page to 20, With this set-
ting, the printer will space 20 lines when a form feed
is performed.
6-75