Troubleshooting The Installation - Reliance electric GV3000 Installation Instructions Manual

7.0 TROUBLESHOOTING THE INSTALLATION
The following table describes possible installation problems and their corrective actions. Chapter 9 in
instruction manual D2-3324 also contains guidelines for troubleshooting the drive.
Description of Problem Corrective Action
Replacementboard is too big/too small. Check the part number on the replacement board.
Use the table in the Preface of this manualto verify
you have the appropriate board for your installation.
CHS appears on the display after the Regulator
board is replaced and poweris applied.
Contact Reliance.
Fault or alarm code other than PUn appears on the
display.
Refer to chapter 5 in instruction manual D2-3323 for
a description of the codes and the corresponding
corrective action.
7-1