Removal Of Main Parts - JVC TD-W103A Quick Start Manual

■
[Z] Removal of Main Parts
Enclosure Sections
1. Top Cover
1) Remove six screws
the top cover.
2) Remove two screws
the top cover, and take off the top cover.
2. Bottom Cover
Remove seven screws @ and
bottom cover.
3. Pow Transformer
Remove four screws
former from the rear panel.
• &? �
Jo
I�
\�
�
Fig. 7-1
(i) retaining the both sides of
®
retaining the rear side of
©
retaining the
®
retaining the power trans­
�
�
/'!
l- - - �
I
3
4. Rear Pannel
Remove three screws® retaining the rear pannel.
5. Front pannel and Main board.
1) Pull out three connector (CN902, CN903, CN904)
from the main board.
2) Pull out the input level knob.
3) Remove two screws (J) retaining the DORBY NR
switch board, and take off the DORBY NR switch
board.
4) Remove the screw® retainng the main board.
TD-W103
A/B/C/E/
?