Advertisement
TD-W217TNevs
TD-W218BKaeveveneruut
@FM bracket/Capstan motor assembly (Mechanism
A and B)
4.Remove soldering of connector FM on Ree! motor board.
(Fig. 2 — 12)
2. Remove three screws @) and disengage two pawils, and then
Reel motor boardass'y
connector FM
Capstan motor
the FM bracket and the capstan belt can be removed. (Fig.
2-12,2-13)
3. Remove two screws @) retaining the capstan motor from the
FM bracket. (Fig. 2 — 12)
4. For reengaging the capstan belt, refer to Fig. 2 — 13.
FM bracket
Fig. 2-12
)
|
|
Capstan belt
@Fiywheel ass'y (Fig. 2 - 14)
1. Remove two screws @ and remove the shield plate.
2. Pull-up the Flywheel (L).and (R) and remove them.
Reel motor board (Fig. 2 - 14)
'1.Remove four soldering of the Reel motor and Actuator
motor and remove the Reel motor board.
@Reel motor board
(Fig. 2 - 15)
1. Remove two screws ©) from rear of chassis and remove the
Reel motor ass'y toward upward.
Actuator motor ass'y (Fig. 2 — 15)
Fig.
2-13
1. Remove two screws © from rear of chassis and remove the
)
Actuator motor ass'y toward upward.
Reel motor
Actuator motor
Soldering
Reel motor board ass'y
Actuator motor ass'y
Real motor ass'y
Soldering
Shield plate
— Flywheel(L)
Mechanism board ass'y
Fig. 2-14
Fig. 2-15
20 (No. 4357)
Advertisement
