Advertisement
SPECIFICATIONS
Type
: Double cassette deck
Track system
: 4-track, 2-channel
Frequency response :
S/N ratio
Improvement of
MOL
Wow and flutter
Channel separation
Crosstalk
Harmonic distortion
Heads
9.5 cm/sec (3-3/4 inch/sec) (High)
(-20 dB recording)
Type IV tape ; 20 - 17,000 Hz
30 - 16,000 Hz (+3 dB)
Type H tape;
20 - 16,000 Hz
30 - 15,000 Hz (+3 dB)
20 - 16,000 Hz
30 - 15,000 Hz (+3 dB)
Type | tape ;
: 58 dB (S = 315 Hz, k3 = 3 %, N= A-
weighted, Type IV tape) The S/N is
improved by about 15 dB at 500 Hz
and by max. 20 dB at 1 kHz ~ 10 kHz
_with Dolby C NR on and improved by 5
dB at 1 kHz and by 10 dB at above 5
kHz with DOLBY B NR on.
'
4.dB at 10 kHz with Dolby C NR on.
: 0.08% (WRMS), +0.2%(DIN/AEC)
: 40 dB (1 kHz)
: 60 dB (1 kHz)
: k3; 0.8% (Type IV tape, 315Hz, 0 VU)
:Deck
A;
METAPERM.
head
for
playback x1
Deck
B;
METAPERM
head
for
recording/playback,
2-gap ferrite head for erasure;
Combination head x 1
Motors
Fast forward/
Rewind time
Input terminals
LINE IN
(x 1 circuit)
Output terminals
LINE OUT
(x 1 circuit)
PHONES x 1
Other terminals
Power requirement
Power consumption
Dimensions
(WxHxD)
Weight
Accessories
TD-W217TNev
TD-W218BK weveena/usut
:Electric governed
DC motor
for
capstan x 1
DC motor for reel x 1
DC motor for mechanism drive x 1
(For both decks A and B)
: Approx. 110 sec. with C-60 cassette
: Input sensitivity; 80 mV (O VU)
Input impedance; 50 kQ
: Output level; 300 mV (0 VU)
Output impedance; 5 kQ
; Output level; 0.3 mW/8 Q (0 VU)
Matching impedance 8 Q - 1 kQ
: COMPU LINK-3/SYNCHRO x 2
: AC 240 V, 50 Hz (Australia)
AC 230 V, 50 Hz (U.K.)
AC 120 V, 60 Hz (U.S.A.)
: With power switch on 17 W
With power switch standby 4.0 W
: 435 x 134
x 331 mm
(17-3/16 x 5-5/16 x 13-1/16")
: 4.8 kg (10.6 Ibs.)
: Pin plug cord ........ a sdadesieecs Restate pated 2
Remote cable sessssensavecsanensnsesnnensaness 1
VICTOR COMPANY OF JAPAN, LIMITED
Printed in Malaysia
VNN2344-671M
(No. 4357) 15
Advertisement
