Table of Contents
Advertisement
Air Preparation unit
1. Check lubricator oil level on sight glass.
2. Check the filter has no water stored in the unit by pulling off the filter cap. If water is
present, drain off before use.
3. Ensure all hose connections to the unit and machine are tightened sufficiently to
prevent leaks.
4. With air supply turned on and hose connected, open air valve fully ensuring a safe
distance is maintained from the machine and set the oil drop in the lubricator to 1
drop of oil every 5 seconds by twisting the regulator dial. SAE 10 grade
Air Supply
Mirage Machines Ltd ∙ 8-10 Enterprise Way ∙ Derby ∙ DE21 4BB ∙ UK ∙ t: +44 (0)1332 291767
f: +44 (0)1332 370356 ∙ sales@miragemachines.com ∙ www.miragemachines.com
Doc: MML265
Issue: 004
Issue Date: 13.06.2013
Page 24 of 39
Advertisement
Table of Contents
