Breville Barista Touch BES880BSS2JAN1 Instruction Book page 30

Table of Contents

Advertisement

PROBLEM
Machine is on but
ceases to operate.
No ground coffee
coming from grinder.
Too much/too little
ground coffee is
being delivered to
the filter basket.
Too much/too little
espresso is being
delivered to the cup.
Grinder is making
a loud noise.
30
POSSIBLE CAUSES
The safety thermal-cut out may
have activated due to the pump or
grinder overheating.
No coffee beans in hopper.
Blocked grinder chamber or chute.
Water / moisture in grinder
chamber and chute.
Grind amount settings are incorrect
for particular grind size.
Grind amount and/or grind size
settings and/or shot volumes
require adjustment.
Blockage or foreign object
in grinder.
EASY SOLUTION
Press the POWER button to switch the
machine off and unplug from the power
outlet. Allow to cool for about
30–60 minutes.
If problem persists, call Breville
Support.
Filler hopper with fresh coffee beans.
Clean and clear grinder chamber
and chute. Refer to 'Advanced Cleaning
for the Conical Burr Grinder' under
.
Care & Cleaning
Clean and clear grinder chamber and
chute. Refer to 'Advanced Cleaning for
the Conical Burr Grinder' under
. Ensure burrs are
Care & Cleaning
thoroughly dry before re-assembling.
It is possible to use a hair dryer to blow
air into the grinder chamber.
Use the grind duration button to
increase or decrease the grind amount.
Refer to 'Dosing' under
and 'Extraction Guide' under
section.
Adjust the grind amount and/or grind
size settings. Refer to 'Setting the Grind
Size' and Dosing under
and to the 'Extraction Guide' under
section.
Tips
Remove hopper, check for debris or
blockage. If necessary, clean and clear
grinder chamber and chute. Refer to
'Cleaning the Conical Burr Grinder'
under
Care & Cleaning
;
Functions
Tips
;
Functions
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Barista touch bes880

Table of Contents