ELEAF iStick Power Mono Manual

PRODUCT OVERVIEW

Notice for Use

Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local distributors, or visit our website at www.eleafworld.com.
For more detailed instructions, please find tutorial video at: www.eleafworld.com/video.

How to Use

Power on/off: Press the fire button 5 times in quick succession within 1.5 seconds to turn on or off the device.
Vaping: In power-on state, keep holding down the fire button to inhale, and release the button to stop inhaling.
Charging: The device can be charged through USB type-C port via a wall adapter or a computer.
Stealth On/Off: In power-on state, keep pressing down the fire button and - button simultaneously to switch between Stealth On and Stealth Off. In Stealth On mode, you can vape with the screen off.
Adjustment buttons lock/unlock: In power-on state, keep pressing down + button and - button simultaneously for two seconds, the + and - buttons will be locked and the screen will display "Lock". In the same way, the + and - buttons can be unlocked and the screen will display "Unlock".
Turn screen upside down: In power-off state, keep pressing down + button and - button simultaneously for two seconds, the screen will rotate 180 degrees.
Switch vaping modes: In power-on state, press the fire button 3 times in quick succession, the device will display current vaping mode. Press the + or - button to switch among Wattage and Bypass modes and then press the fire button once to confirm the vaping mode you chose.

1. Wattage mode:
   Wattage Recommendation and Memory Function: In Wattage Mode, when a coil is detected by the device, the device will recommend the best wattage for the coil according to the resistance of the coil. The wattage is also freely to be adjusted by pressing the + or - button for your preference. The device will remember your usual wattage setting for the same resistance after you vape with it for at least twice in a row.
2. Bypass mode:
   Direct output voltage system is applied in this mode. The higher the battery level is, the higher the output voltage will be.

Properties and Protections

Resistance Range: 0.1Ω-3.0Ω
Over-time Protection: Every time when vaping time exceeds 10 seconds, the screen will display "Over 10S" and the output cuts off automatically.
Short Circuit Protection: When short-circuit occurs, the screen will display "Atomizer Short".
No Atomizer Alert: If the device detects no atomizer, the screen will display "No Atomizer".
Low Voltage Protection: When the voltage of the device is lower than 3.3V, the screen will display "Low Voltage" and there is no output when vaping. Charge the device to reactivate it.

1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication

1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged. The proper operating temperature for the device is -5℃ ~ 50℃ and the proper charging temperature is 0℃~50℃.
3. Do not use this product for other purposes except only for vaping and don't swallow the e-liquid.

Possible Adverse Effects

1. This product may be hazardous to health and can contain nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.