Advertisement

ELEAF IORE CRAYON Manual

PRODUCT OVERVIEW

PRODUCT OVERVIEW

E-LIQUID REFILLING

  1. Remove the pod cap
  2. Open the filler plug on the pod
  3. Fill the pod with e-liquid

Notice for Use

Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local distributors, or visit our website at www.eleafworld.com.
For more detailed instructions, please find tutorial video at: www.eleafworld.com/video.

How to Use

Fill e-liquid: Remove the pod cap. Open the filler plug on the pod. Inject the e-liquid through the filling hole into the pod. Do not over-fill, and please wait five minutes before first use to let the coil inside fully soaked.
Install the pod: Simply insert the pod into the device. When the device detects that the pod is attached, the indicator light lights up for 2 seconds.
Power on/off: 5 quick clicks on the button to turn on the device, and the indicator light will flash 3 times quickly to indicate that the device is powered on. In the same way, it can also be powered off.
Vaping: When the device is powered on, keep holding down the button to take a puff or inhale directly through the mouthpiece without even pressing down the button. When vaping, the indicator light stays lit.
Charging: The device can be charged through USB Type-C port via a wall adapter or a computer. The indicator light stays lit in red while charging and goes off when fully charged.

Properties and Protections

Resistance Range: 0.6Ω-3.0Ω
Over-time Protection: Every time when vaping time exceeds 10 seconds, the device stops output automatically with the indicator light quickly flashing 5 times.
No Pod Detected Reminder: If pod is not detected by the device, the indicator will flash slowly 3 times when you inhale. It stops flashing right after you stop inhaling.
Low-battery Protection: When the voltage of the device is lower than 3.3V, the indicator light flashes 10 times. There will be no output when vaping. Charge the device to reactivate it.
Short Circuit Protection: If short circuit occurs before vaping, the indicator light flashes 5 times, and there will be no output when you start to vape; if short circuit occurs during vaping, the indicator light flashes 3 times, and there will be no output.

  1. Please keep out of reach of children.
  2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication

  1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
  2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged. The proper operating temperature for the device is -5℃ ~ 50℃ and the proper charging temperature is 0℃ ~ 50℃.
  3. Do not use this product for other purposes except only for vaping and don't swallow the e-liquid.

Possible Adverse Effects

  1. This product may be hazardous to health, and can contain nicotine which is addictive.
  2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ELEAF IORE CRAYON Manual

Advertisement

Need help?

Need help?

Do you have a question about the IORE CRAYON and is the answer not in the manual?

Questions and answers

Table of Contents