ELEAF iJUST:P40 Manual

PRODUCT OVERVIEW

Notice for Use
Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local distributors, or visit our website at www.eleafworld.com
For more detailed instructions, please find tutorial video at: www.eleafworld.com/video

How to Use

Assembling:

1. Pull out the cartridge from the device.
2. Take out the GTL coil from the box, drip a few drops of e-liquid directly into the coil to make it fully saturated before first use.
3. Insert the primed coil into the cartridge.
4. Slide the top cap to expose the fill port, fill the cartridge with e-liquid, and slide the top cap back after filling.
5. Replug the cartridge back onto the device.
6. Adjust the airflow by twisting the airflow control knob.

Power On/Off: 5 quick clicks on the fire button to turn on the device, and the battery level indicator light under the button will flash 3 times quickly to indicate that the device is powered on. In the same way, it can also be powered off. The color of the indicator light changes according to the remaining battery capacity.

Selecting Power Level: In power-on state, press the + or - button to increase or decrease the wattage level.

Wattage Recommendation and Memory Function:
When a coil is detected by the device, the device will recommend the best wattage level for the coil according to the resistance of the coil. The wattage level is also freely to be adjusted by pressing the + or - button for your preference. The device will remember your usual wattage setting for the same resistance after you vape with it for at least twice in a row.

Vaping: In power-on state, keep holding down the fire button to inhale, and release the button to stop inhaling.
When vaping, the indicator light stays lit.

Charging: The device can be charged through USB type-C port via a wall adapter or a computer. The indicator light is red during charging and goes out when fully charged.

Properties and Protections

Resistance Range: 0.25Ω-3.0Ω
Over-time Protection: Every time when vaping time exceeds 10 seconds, the indicator light will flash 5 times and the output cuts off automatically.
Short Circuit Protection: If short circuit occurs before vaping, the indicator light will flash 5 times and the output cuts off automatically when you start to vape; if short circuit occurs during vaping, the indicator light will flash 3 times.
Low Voltage Protection: When the voltage of the device is lower than 3.3V, the indicator light flashes 20 times and there is no output when vaping. Charge the device to reactivate it.

1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication

1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged. The proper operating temperature for the device is -5℃ ~ 50℃ and the proper charging temperature is 0℃ ~ 50℃.
3. Do not use this product for other purposes except only for vaping and don't swallow the e-liquid.

Possible Adverse Effects

1. This product may be hazardous to health and can contain nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.