Insert Cable Clip; Connect Shift Rod; Remove Tiller From Crate; Check Tire Pressure - Craftsman TILLER 917.29332 Owner's Manual

INSERTCABLE CLIP
• Insert plastic cable clip into hole on the
back of handle column. Push cables
into clip.
Handle Column
Cables
Attach this end to shift lever
_"_Attach this EndTo shi" _ Shift Rod
Lever indicator
Hairpin Clip Shift Lever
ndicator
Shift Rod
Cable Clip
CONNECT SHIFT ROD
• Insert end of shift rod farthest from bend
into hole of shift lever indicator.
• Insert hairpin clip through hole of shift
rod to secure.
• Insert other end of shift rod into hole in
shift lever.
• Insert second hairpin clip through hole of
shift rod with bend of clip on rinht side.
REMOVE TILLER FROM CRATE.
• Adjust handle assemby to lowest posi-
tion. Be sure lock lever is tightened
securely.
• Make sure shift lever indicator is in "N"
(neutral) position.
• Tilt tiller forward by lifting handle.
Separate cardboard cover from leveling
shield.
• Rotate tiller handle to the dght and pull
tiller out of carton.
Shift Lever
Shift.od \ Lk
CHECK TIRE PRESSURE
The tires on your unit were overinflated at
the factory for shipping purposes. Correct
and equal tire pressure is important for
best tilling performance.
• Reduce tire pressure to 20 PSI.
HANDLE HEIGHT
• Handle height may be adjusted to better
suit. operator. (See "TO ADJUST HAN-
DLE HEIGHT" in the Service and
Adjustments section of this manual).
7