INSTALLATION OF INDOOR UNIT
40
Connecting Condensate drainage
Step 1. Before the indoor unit's final positioning, Insert the
drainage hose into the drain ①, which leads to the
sinkhole or storm drain. Seal the gap with a suitable
gasket.
Step 2. Then push the appliance to the wall ②.
CAUTION
!
• Attaching the hose for the condensate drain to the
sewer hose can cause corrosion of the appliance's
internal components.
• The drain pipe must have an odor trap!
Step 3. Before connecting any pipes, level the indoor unit
with supplied adjustable levelling feet.
Front Panel Removal
Step 1. After releasing screws from the top the Indoor unit,
detach front panel ①.
Step 2. Lift the front panel ② and tilt it towards you ③ for
opening
Step 3. Before taking front panel off completely, disconnect
the cable of the remote controller ④.
CAUTION
!
After installation is completed, reconnect the cable of
remote controller.
④
②
①
①
③
②