Table of Contents
Advertisement
Installation and
Calibration
JBL
Remote Control
:
Press and hold ACCY, then press DONE to activate a "You Are Here" mode which:
ACCY Functions
e Sets Bass, Treble and Tilt to FLAT
© Sets volume to -10dB
Leaves Loudness at its current setting
Loads 5.1 THX or THX Cinema if no AC-3 is available
Selects the V-DISC input
oe
Default Input Effect Assignments
TELEVISION
5.1 LATE NITE
5.1 DOLBY/THX
THX CINEMA
ROCK/POP
JAZZ
CLASSICAL
MUSIC SURROUND
On-Screen
Display OFF
Bass Adjust
Clear Assigned Effect*
Assignable
Effects (8)
Activate Zone 2 Control
Activate "You Are Here*
mode;
Lock in
LOCK SETTINGS menu.
Hold down to access
hidden functions.
-5dB Volume Step
Deactivates Zone 2 IR Control mode
THESIS
}
saance
CE
——
L<2)
On-Screen
Display ON
Trabie Adjust
Full Mute
Subwoofer Level (Up)
Deactivate Zone 2 Control
and restore normal operation
Subwoofer Level (Down)
+1dB Volume Step
+5d0B Volume Step
—1dB Volume Step
To assign different effects to the input buttons, the original assignment
must be cleared with the following procedure. Press and hold ACCY, then
press BYPASS. Press and hold ACCY again and press the input button. The
display should show EFFECT ASSIGNMENT CLEARED.
Assign the effect to the input button by selecting the desired effect and press
and hold ACCY, then press the input button.
Advertisement
Table of Contents
