Panasonic CU-M1403KE Operating Instructions Manual page 7

Two R03, UM-4 Panasonic dry-cell batteries or equivalent.
Remote Control Preparation Before Operation
Remove the cover from Insert the two batteries. Fix the cover to the
the back of the remote back of the remote control
control. ("12:00" will flash in the
operation display.)
FEOEEN) Gent ae ¢ Ifthe display does not
[OPEN } Gently press the place " ;
Be
rod [OPEN] and slide
appear when the batteries
the cover toward you.
g
are inserted, remove the
baiteries and insert them
once more.
Cautions regarding the batteries
The batteries can be used for approximately one year.
Do not use rechargeable (Ni-Cd) batteries, because such batteries differ from standard dry cell batteries in
shape, dimensions and performance.
Be sure to replace the batteries with two new batteries of the same type as each other.
Remove the batteries if the air conditioner is not going to be used for an extended period of time.
Press the (Start/Stop } button at the place where the holder is to be
affixed to confirm that there is a beep when the remote control sig-
nals are received by the main unit.
Secure the holder with screws. To put the remote control into
the holder
Insert the remote contro! diagonally from
above, and then press to the back of the
holder.
Remote control holder