Soft Dry Operation - Panasonic CU-M1403KE Operating Instructions Manual

Cooling Mode and Soft Dry Mode Operation fof fT Tim
Fine adjustments to the room temperature and airflow volume to be made by selecting Cooling Mode or Soft Dry Mode.
After first selecting the mode, just press the Start/Stop button to start operation.
Press the Operation Mode Selection Press the | Start/Stop | "—" button
button to select the desired (The operation indication lamp lights up.)
operation mode.
AKOG °c @
=e (C)
al BZ
Cres) CE)
* The display changes in the order ° If the (Start/Stop )—" button is pressed once
: more, the air conditioner will stop.
IW 4+*K>BUO>DG@ (The operation indication lamp will put out.)
each time the button is pressed.
IX Automatic Operation Mode
sk
as Cooling Operation Mode
O Soft Dry Operation Mode
G Circulation Operation Mode
Soft Dry Operation
¢ Soft Dry is a very gentle cooling operation consisting primarily of
dehumidifying. lt does not lower the room temperature very -
much.
* The operation will be standard cooling until the room tempera-
ture reaches the setting temperature, and then operation will
switch to Soft Dry.
The airflow will automatically change to Low.
¢ Ifthe room temperature is higher than the setting temperature,
the operation will return to standard cooling by the setting fan
speed.
¢ During Soft Dry operation, the fan of the indoor unit will operate
and stop at 4-second intervals, and operation will be switched on
and off for up to 10 minutes on and 6 minutes off,
Cooling operation
until room
temperature —
reaches the
setting temperature
Low airflow
amount
When room temperature reaches the setting
temperature, operation will switch to Soft Dry.
Setting temperature
12