Advertisement
MUTE
Front panel: To mute, press the active source's input button.
Remote control: Press the mute button.
UNMUTE
Front panel: Press the active source's input button again.
If the source is
changed while the KAV-300i is muted, press the new source's input button a
second time to unmute the KAV-300i.
Remote control:
Press the mute button.
S3/proc: For simplified integration of an A/V surround sound processor, the
S3/proc input can be set to operate as a unity gain stage.
In this Theater
Throughput mode, when the S3/proc input is selected, the KAV-300is volume
and balance controls are disabled.
Volume control is transferred from the
KAV-300i to the A/V surround sound processor connected to the S3/proc
input.
The left and right channel volume settings are now independent of the
KAV-300is volume control and the overall system level is determined by the
A/V surround sound processor exclusively.
NOTE: The factory default position sets the S3/Proc input as a standard input.
To enable this option, it is necessary to remove the top cover of the KAV-300i.
1. Unplug the KAV-300i from the AC outlet.
2. Remove the KAV-300i top cover screws with the supplied T-10 Torx wrench.
Lift the cover from the KAV-300i.
Advertisement
