Advertisement
AMPLIFIER FUNCTIONS
PWR
Turns KRELL Remote Control Power amplifiers
On or Off.
MTR
Turns KRELL S-Series amplifiers' bias level meters
On or Off and cycles through KRELL Audio
Standard meter functions.
NOTE: The B2, Phase, and GAIN buttons are not functional with the KAV-300i.
BATTERY INSTALLATION AND REMOVAL
NOTE: Batteries should be replaced when functions from the remote control
become intermittent.
The KAV-300i remote uses two AA size batteries.
1. Remove the back plate to expose the battery storage compartment.
2. Remove the old batteries and install new ones following the battery position
diagram on the plastic battery receptacle.
3. Re-install the back plate.
4. Check to make sure the remote control is functioning properly.
If you have questions about the remote control operation contact the KRELL
staff for assistance.
Advertisement
