How To Record Video When The Camera Detects Loud Noises; How To Automatically Zoom In On A Specific Area With Gatekeeper - Axis Q6052 User Manual

AXIS Q6052 PTZ Dome Network Camera
Setup
3. Make sure you have set up the application according to your needs.
Add a preset position:
4. Go to Settings > PTZ and set where you want the camera to be directed by creating a preset position.
Create an action rule:
5. Go to Settings > System > Events > Action rules and add an action rule.
6. Type a name for the action rule.
7. From the list of triggers, select Applications and then select AXIS Video Motion Detection (VMD).
8. From the list of actions, select PTZ Control and then select Preset Position.
9. Select the preset position you want the camera to go to.
10. Click Ok.

How to record video when the camera detects loud noises

This example explains how to set up the camera to start recording to the SD card five seconds before it detects loud noise and to
stop one minute after.
Make sure audio turned on:
1. Set up the stream profile to include audio, see How to add audio to your recording.
Make sure the audio detection is set up:
2. Go to Settings > System > Detectors > Audio detection.
3. Adjust the alarm level according to your needs.
Create an action rule:
4. Go to Settings > System > Events and add an action rule.
5. Type a name for the action rule.
6. From the list of triggers, select Detectors and then select Audio Detection.
7. From the list of actions, select Record video and then select Preset Position.
8. Select the stream profile where audio has been turned on or create a new one.
9. Set the pre-trigger time to 5 seconds.
10. Set the post-trigger time to 60 seconds.
11. Select SD card from the list of storage options.
12. Click Ok.

How to automatically zoom in on a specific area with gatekeeper

This example explains how to use the gatekeeper functionality to make the camera zoom in automatically on the license plate of a
car that passes through a gate. When the car has passed, the camera zooms out to the home position.
Create the preset positions:
1. Go to Settings > PTZ > Preset positions.
2. Create the home position that includes the entrance of the gate.
11