Table of Contents
Advertisement
If the outlet is no longer accessible after
installation, an additional means of dis-
connection must be provided for all
poles. Suitable means of disconnection
include switches with an all-pole con-
tact gap of at least 1/8" (3 mm). These
can be circuit breakers, fuses, and re-
lays.
The plug and power cord must not
come into contact with the back of the
wine conditioning unit as vibrations can
cause damage to these components.
This could result in a short circuit.
Do not plug in other appliances behind
the wine conditioning unit.
Do not connect the wine conditioning
unit to a stand-alone inverter such as
those used with an autonomous energy
source; for example, solar power.
When the wine conditioning unit is
switched on, power surges could result
in a safety switch-off. The electronic
unit could be damaged. The wine con-
ditioning unit must not be used with
what are known as energy-saving de-
vices either. These reduce the amount
of energy supplied to the unit, causing it
to overheat.
If the power cord needs to be replaced,
this must be done by a qualified techni-
cian.
Connecting the wine storage unit
Insert the electrical plug into the back
of the wine storage unit.
Make sure that the electrical plug has
clicked into position correctly.
Insert the wine storage unit's plug
into the electrical socket.
Installation
51
Advertisement
Table of Contents
