Table of Contents
Advertisement
Installation
Tip: Proceed carefully when adjusting
the feet, alternating between the left
and right feet.
Place a bubble level across the instal-
lation aids on the appliance door
to check the wine conditioning unit's
alignment.
Unscrew the adjustable feet and
on both sides at least until the
marking on the toe-kick is aligned
with the required 1 1/4" (32 mm) on
the spacer . The standard dimen-
sion of 1 1/4" (32 mm) relates to a
niche height of 84" (2,134 mm).
It is important to adjust the feet to a
height of at least 1 1/4" (32 mm) so
that the ventilation of the wine condi-
tioning unit via the toe-kick functions
correctly.
36
Risk of damage if the feet are
adjusted too much.
The rear adjustable feet can be dam-
aged.
Unscrew the feet only until the
marking on the toe-kick is aligned to
a maximum of 2 7/16" (62 mm) (max.
niche height of 85 3/16" (2,164 mm)).
Check the alignment of the wine con-
ditioning unit again using the installa-
tion aids and the bubble level.
Advertisement
Table of Contents
