Table of Contents
Advertisement
84
Learning the Basics
Powering down the computer
telephone number for the dial-up connection. To set up the
network connection, use the Dial-Up Networking Wizard:
1
Click Start and point to Programs.
2
Point to Accessories, then to Communications, and click
Dial-Up Networking.
3
Enter the phone number of your network connection and let
the program dial the number.
The computer connects with the network.
Powering down the computer
When you power down the computer, you have three options
to choose from: Shut down, Hibernation and Standby. Each
option has its advantages.
TECHNICAL NOTE: Before using any of these options to
power down your computer, save your files and make sure
the disk activity lights are off.
If you decide to continue working, wait a few seconds before
turning the computer on again.
Shut down command
The Shut down command shuts the computer down
completely. When you start up again, the computer runs a
self-test and loads the operating system. You must open any
programs and files you want to use.
Factors when choosing Shut down:
No power is used while the computer is shut down. This
is the most efficient mode if you will be away from your
computer for an extended time.
Restarting from Shut down uses the most time and
battery power.
Advertisement
Table of Contents
