Table of Contents
Advertisement
3
Open Notepad (click Start, point to Programs, then point to
Accessories and click Notepad).
4
Press
Notepad.
5
Add a paragraph break and type some notes describing what
you were doing when you received the message.
6
Save the file and refer to it when you contact the software
manufacturer.
Problems when you turn on the computer
These problems may occur when you turn on the power.
The computer will not start.
Make sure you attached the AC adapter and power cable properly
or installed a charged battery.
Press and hold down the power button for a few seconds.
If you are using the AC adapter, check that the wall outlet is
working by plugging in another device, such as a lamp.
The computer starts but, when you press a key on the
keyboard or touch the AccuPoint II, nothing happens.
You are probably in Standby mode and have a software or
resource conflict. When this happens, turning the power on returns
you to the problem instead of restarting the system. To clear the
condition, press
button.
Clearing the condition may get the computer running, but it won't
solve a resource conflict. Read the documentation that came with
the conflicting device and
page
194.
Problems when you turn on the computer
and
simultaneously to paste the details into
Ctrl
v
,
, and
Ctrl
Alt
If Something Goes Wrong
simultaneously, or press the reset
Del
"Resolving a hardware conflict" on
187
Advertisement
Table of Contents
