60
Getting Started
Setting up your software
Sample Add Printer Wizard
3
Click Next.
The Add Printer Wizard asks you to select your printer.
TECHNICAL NOTE: If your printer is Plug and Play, the
Windows
it automatically. You can ignore the remainder of this
section. See your printer manual.
4
If the printer you are setting up:
5
Click Next.
The Add Printer Wizard prompts you to select your printer.
6
From the list of manufacturers and printers, select your
printer, then click Next.
7
Select the port settings according to the instructions in your
printer's documentation and the port to which your printer is
connected, then click Next.
®
Millennium Edition operating system recognizes
Is not connected to a network, select Local printer.
Is connected to a network, select Network printer.