Table of Contents
Advertisement
7
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the socket.
8
Gently press down on the memory module connector until the
clips snap into place.
Do not force the module into position. The memory module
should be level when secured in place.
Inserting the memory module
CAUTION: Avoid touching the connectors on the memory
module or on the computer. Grease or dust on the
connectors may cause memory access problems.
9
Replace the expansion memory slot cover.
10
Replace the screws and tighten them.
11
Turn the computer over and reconnect any cables you
removed.
When you turn on your computer, it automatically recognizes
the additional memory. If the computer does not recognize the
memory, shut down the computer, remove the memory slot
cover, and make sure the memory module is seated properly,
as described in step 8.
Getting Started
Setting up your computer
49
Advertisement
Table of Contents
