Carbest 82285 User Instruction page 8

Carbest Sinus Power Inverter | 82282/82283/82284/82285/82286
INSTRUCTION
DE
To get the most out of the power inverter, it must be installed and used properly.
Please read the instructions in this manual before installation and operation.
EN
Front view - Input side
IT
ES
FR
Pure sine wave inverter 1000 W
1. Chassis ground
NL
2. Remote control port
Optional: Remote control incl. 5 m cable (Item no.: 81947)
FI
Front view - Output side
DK
SE
Pure sine wave inverter 1000 W
1. Main Switch
2. USB output port (5 V, 2.1 A)
Pure sine wave inverter 2000 W–3000 W
3. Cooling fan
4. Input battery connectors (red + / black -)
Pure sine wave inverter 2000 W–3000 W
3. Output outlets 5. Status LED
4. Load level LED 6. Dip switch
Dip switch Settings
S4 0: 50 HZ 1:60 HZ
S3 0: OFF 1:15 % loading power
S2 0: OFF 1:10 % loading power
S1 0: OFF 1:5 % loading power
LED indicators
< 20 % off
between 20 % and 50 % green
Load level
between 50 % and 90 % orange
> 90 % red
Power on green
Status
Fault/protection red
Main switch
ON Power on the inverter
OFF Power off the inverter
Setting the inverter to control by
Remote
remote controller
14
Carbest Sinus Power Inverter | 82282/82283/82284/82285/82286
NOTES
• Before installing the inverter make sure the main switch must be OFF.
• Before using the remote unit make sure the main switch must be Remote.
• Ensure the remote control setting is off.
DC input terminals
Connect to 12 V battery or the other power sources. (+) is positive, (-) is negative. Reverse
polarity connection will blow internal fuse and may damage inverter permanently.
DC input voltage
Model
Minimum
12 V 10,5 V
Protection features
DC input (VDC)
Modell
Over voltage Under voltage
Shutdown Restart Alarm Shutdown Restart
12 V 16 V 13 V 11 V <10,5 V
NOTE
The specifications are subject to change without notice.
INSTALLATION
Please use the provided cables to connect the unit to the battery.
The input terminals on the rear side of the unit are Red (Positive) and Black (Negativ).
Connect the red cable to the red terminal and to the positive pole of the battery. Connect
the black cable to the black terminal and to the negative pole of the battery.
It is strictly recommended to add a fuse as close as possible to the positive pole of battery.
Make sure all connections are solid and secured. Poor connections may cause overheating
the cable and shorten the battery backup time.
Ensure that the inverter is OFF before connecting with the battery.
Maximum
15 V
Over temperature
protection
Shutdown Restart
12,5 V 55 °C 45 °C
15
DE
EN
IT
ES
FR
NL
FI
DK
SE