Safety Precautions; Technical Specifications - Champion CHBF220 User Manual

Safety precautions

Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed
below may result in electric shock, fire and/or serious injury.
EN
Warning: When using electrical appliances, basics safety precautions, including the following,
should always be followed to reduce the risk of fire, electric shock, personal injury and material
damage.
1. Read and retain these instructions for future use.
2. Improper installation may result in the risk of fire, electric shock, or serious injury to persons.
3. Check that the mains voltage corresponds with the rating of the appliance before operating.
4. Unplug from electrical supply source before cleaning.
5. The fan should be placed on a flat and stable surface when operating to avoid overturning.
6. Do not use in wet conditions or areas of high humidity.
7. Do not insert objects through the bars of the guard.
8. Do not use outdoors.
9. Unplug from mains if not in use.
10. Do not insert fingers or other objects through the fan guard.
11. Do not use if any parts are damaged or missing.
12. If using an extension cord with this product, the marked electrical rating of the cord set, or
extension cord should be at least as great as the electrical rating of the product. Never use the
plug with an extension cord unless of the plug can be fully inserted into the extension cord
13. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
14. This appliance can be used by children aged 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved.
15. Children shall not play with the appliance.
16. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliances by a person responsible
for their safety.
17. Ensure that the fan is switched off from the supply mains before removing the safety guard.
18. Warning! Never use without the guards in place. After assembly, do not remove the guards
during use or cleaning.

Technical Specifications

Model No:
Rated Voltage:
Power:
Assembly
1. Place the pole on the base and secure it by bolt.
2. Position the rear guard onto the motor shaft, ensuring that the openings are aligned
precisely with the lugs on the motor housing and the grip is at the top and then secure the
rear guard to be tight with four screws (4pcs with washer).
3. Slide the fan blade onto the notch on the motor shaft, locate fully and secure by tightening
the fan blade screw fully. The screw should be positioned on the flat part of shaft.
1
CHBF210
220-240V ~50/60Hz
30W