Table of Contents
Advertisement
Available languages
Available languages
4.
Position the front guard against the rear guard and holds both guards together and close
the clip then tighten the screw and the nut at the bottom of the guard.
1.
Position Screw
2.
Screw
3.
Set Screw
4.
Knob
5.
Tube
6.
Front Guard
7.
Fan blade
8.
Rear Guard
1.
3.
Operating instructions
1.
Ensure slider is in the off position (0) and then plug in.
2.
Adjust fan speed by moving control slider.
0
Off
1
Low
2
Medium
3
High
3.
To oscillate fan, press down on control knob at the top of the motor housing. To stop
oscillation, pull up on the same knob.
4.
To change the angle of the fan, loosen large tilt control knob, adjust fan head to the desired
position and retighten.
9.
Knob
10.
Fan head motor
11.
Power cord
12.
Knob
13.
Pole
14.
Base
15.
Bolt
6.
2.
4.
5.
7.
8.
EN
9.
10.
11.
12.
13.
14.
15.
2
Advertisement
Table of Contents
