lap 148PG Instruction Leaflet

Wiring
Having correctly identified the wiring from your existing
light fitting, pull the wire through the hole and connect
Check that...
• You have correctly identified the house wires.
• The connections are tight.
Fitting/replacing bulbs
• Fitting/Replacing the bulbs - 1 x MAX 15W LED E27 GLS.
• When changing a bulb, always, switch off at the
mains and allow the bulb to cool before handling.
Dispose of used bulbs carefully. Do not exceed the
wattage stated or use a different shape bulb from
that indicated on the fitting.
Cleaning
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice. The packaging on this product can also be recycled.
Safety information
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
The glass shade must be replaced if it becomes cracked or damaged.
Do not use product without glass shade attached.
UK Manufacturer:
Kingfisher International Products Limited,
3 Sheldon Square, London, W2 6PX,
United Kingdom.
to the connection block inside the product in the
following way:
• No loose strands have been left out of the
connection block.
• Do not exceed the wattage stated or use a different
shape bulb from the indicated on the fitting.
• Unscrew the bulb anti clockwise to remove.
• Carefully locate the bulb in the lampholder and turn
clockwise to secure.
Glass parts – Wipe clean with a damp cloth. Do not use
abrasive materials as these will damage the finish.
Replace Cracked
Shade
EU Manufacturer:
Kingfisher International Products B.V.
Rapenburgerstraat 175E,
1011 VM Amsterdam, The Netherlands.
Instruction leaflet
Half Lantern
Outdoor Wall Light
148PG, 495PG
19/07/2021