lap 442PG Instruction Manual

Fitting/replacing bulbs
• Fitting/Replacing the bulbs - 1 x MAX 60W E27 GLS
or energy saving equivalent.
• Always allow the bulb to cool before touching.
Fit the recommended bulbs. Do not exceed the
recommended wattage or use a different shape of
bulb as this may cause your light fitting to overheat.

Cleaning

We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.

Recycling advice

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice. The packaging on this product can also be recycled.

Safety information

For your safety, always switch off the supply before changing lightbulbs, or cleaning.
The glass shade must be replaced if it becomes cracked or damaged.
Do not use product without glass shade attached.
UK Manufacturer: EU Manufacturer:
Kingfisher International Products Limited, Kingfisher International Products B.V.
3 Sheldon Square, London, W2 6PX, Rapenburgerstraat 175E,
United Kingdom. 1011 VM Amsterdam, The Netherlands.
• Some energy saving bulbs are not suitable for use
with a dimmer switch.
Plastic parts – Wipe clean with a damp cloth. Do not use
abrasive materials as these will damage the finish.
Do not clean the units with a pressure washer.
Replace Cracked
Shade
26/05/2021
Instruction leaflet
Shutter Outdoor
Bollard and Post Light
442PG, 948PG