Erasing A Section Of A Title (A-B Erase) - Sony RDR-GX330 Operating Instructions Manual

5 When you finish selecting titles,
select "OK," and press ENTER.
The list of the titles to he erased appears
[_}rconfirmatkm.
• To change the selection, select
"Change," and repeat from step 3.
6
Select "OK" and press ENTER.
The titles are erased.
To erase all titles onthe disc
You cml reformat a DVD+RW or DVD-RW
to make the disc blank.
See "8. Relbrmalting a disc" on page 37.
You can select a section (scene) in a title and
erase it. Nole Ihat erasing scenes in a tille
callllOl be
undone.
After step 2 of "Erasing and Editinga
Title," select "A-B Erase"and press
ENTER.
The display [k)rsetting point A appears.
The title starts to play.
• To return to the beginning of the title,
press || PAUSE and then press
PREV.
Select point B using ,<-=/_, and
press ENTER.
Playback pauses.
5 Press ENTER if point B is correct.
If point B is incorrect, select point B
using "_lll/lll_, and press ENTER. The
display asks l\_r con fimmtion.
• To reset point A, press 11"and
ox"_RETURN, and go to step 2.
• To reset point B, press _ and repeat
step 4.
• To preview the title without scenes to
be erased, select "Preview" (except t_}r
DVD+RWs).
6
Select "OK," and press ENTER.
The scene is erased. The display for
setting point A appears.
• To continue, go to step 2.
• To finish, select "Quit."
"_° Hint
A chapter mark is inserted after the scene was
erased. The chapter mark divides the title into
separate chapters on either side of the mark.
Notes
• hnages or sound may be momentarily interrupted
at the point where you erase a section of a title.
• Sections shorter than five seconds may not be
erased.
• For DVD+RWs, the erased section may be
slightly different from the points you selected.
m
=_
A-B Erase t World Srmr_s
Sel point A
AO_O0_02
/ ............. 1
Playback point
Select point A using -_.9/1_,-, and
press ENTER.
Playback pauses.
3
Press ENTER if point A is correct.
If point A is incorrect, select point A
using _111/111_, and press ENTER. The
display li_)rsetting point B appears.
--_continued 61