Sony TC-366 Service Manual page 15

shaft, pinch roller
lever, retractive
: 3~4mm (1h ~5/2")
Fig. 11-8 Pinch roller stroke adjustment
pinch roller
+
in FWD mode
22mm £0.46mm
(5564")
in STOP mode 7
less than 13mm (33/6q'')
'
1
* Dummy Capstan
Prepare a flywheel ass'y (for TC-366) and remove the
capstan shaft (dummy capstan) from the flywheel ass'y by
patting the head of the capstan shaft with the hammer,
taking care not to bend the shaft. Flywheel Ass'y
Part No.: X-34720-03
11-5. Pinch Roller Pressure Check
— in STOP mode —
(164).
pinch lever (B)
dummy capstan
pinch lever {A}
lever, retractive
head deck — back view —
Fig. 11-10 Pinch roller pressure check
= ee
Be sure that the tension gauge indicates 800 ~ 1,000 g
(1 lb 12 0z~21b 3 .0z) when the pinch roller is
detached from the capstan in FWD mode.
800 ~ 1,000 g
{1 lb 120z~2Ib 3oz)
Fig. 11-11 Pinch roller pressure check
11-6. Tape Shifter Position Adjustment
— in STOP mode —
head, record
Adjust by positioning the lug.
Fig. 11-12 Tape shifter position adjustment
11-7. Speed Selector Cam Position Adjustment
— in FWD mode —
cabinet.
switch
equalizer
screw, adjusting
slot, stopper pin, idler arm (c)