Sony TC-630 Service Manual

: Power Requirements:
Tape Speeds:
Reel Size:
Track System:
Frequency F.esponse:
(NAB}
Wow and Flutter:
(NAB)
Power Output:
Signal-to-Noiss Ratio
Harmonic Distortion:
Recording Level Indication:
Tone Con*rob:
Inputs:
Canadian Model!
E Model
US Model
AEP Mode!
UK Model
SPECIFICATIONS
85W (100 VA), 117 volts
(USA, Canada Mode!) :
B5W, 100, 110, 117, 125, 220 & 240 volts
{E, AEP, UK Model)
(Voltage selector provided in the set)
AC 60H: (USA, Canada Made!)
AC 50 or 60 Hz (E, AEP, UK Model)
{Convertible with power frequency selector
and capstan sleeve}
19 cin/s. 9.5 cm/s and 4.8 cnvs
TA ips, 3% ips and 1% ips
7 inches or smaller
4-track stereophonic or monephonic
30.22,000 Hzat 19¢em/s, 7% ips
30~13,000Hzat 9.5cm/s, 3% ips
30~ 10 000Hzat 4.8cm/s, 17% ips
Less than 0.09% at 19cm/s, 7% ips
Less than 0.12% at 9.5cm/s, 3% ips
Less than 0.16% at 4.8crv/s, 17/5 ip?
15W (max:mum) per channel
40'N (dynamic power) with both channels
Better than 50 dB
Less than 1.2% (at normal recording level
Less than 0.5% iin working as an amplifier)
Two VU meters
Two separate controls for bass and treble
Low impedance micropkone inputs:
-72 dB (0.2 mV)
High impedance auxiliary inputs:
-22 dB (0.06V)
High impedance tuner inputs:
-22 dB (0.06V)
Phonograph inputs: -52 dB {2 mV)
Outputs:
Recording Time:
(vzith 1,800 ft tape)
Semiconductors:
Heads:
Dimensions:
Weight:
Line outputs: 0 dB (0.775¥),
Load impedance 100ki2
Speaker outputs (for external):
Load impedance 822
Speaker outputs (for lid}:
Load impedance 162
Headphone outputs (for monitoring):
Load impedance 82
Headphone outputs (for listening):
Load impedance 82
4-track stereo
1.5 hrs at 19cm/s, 7% ips
3hrsat 9.5cm/s, 3% ips
Gtrsat 48cm/s, 1% ips
4-rack mono
Shrsat 19¢em/s, 7% ips
6hrsat 9.5crm/s, 3% ips
t2hrsat 4.8cmvVs, 17: ios
Transistor: 40 pcs.
Diode: 7 pes,
Record: PP 30-2902A
PP 102-2902
Serial No. 124701 and tater}
Playbac::: RP30-2902
RF102-2902
(Serial No. 124701 and later)
Erase: E&18-2902A
21 kg, 46 tb 3 oz