Table of Contents
Advertisement
4.
Remove the power cable from the clip on the base pan.
5.
Disconnect the power supply cable from the PWR system board connector (1) and the PWRCPU system
board connector (2).
6.
Press the tab (3) on the base pan in front of the power supply that holds it in place.
7.
Slide the power supply toward the front of the computer, rotate toward the fan so the power supply
clears the lip on the top of the chassis, and then lift the power supply out of the chassis (4).
To install the power supply, reverse the removal procedure.
50
Chapter 4 Removal and replacement procedures – Microtower (MT) chassis
Advertisement
Table of Contents
