Table of Contents
Advertisement
9.
Rotate the slot cover retention latch back in place to secure the expansion card.
10.
Connect external cables to the installed card, if needed. Connect internal cables to the system board, if
needed.
11.
Replace the computer access panel.
12.
Reconnect the power cord and turn on the computer.
13.
Lock any security devices that were disengaged when the computer access panel was removed.
14.
Reconfigure the computer, if necessary.
Drives
Description
Hard drives/Solid-state drives
2-TB, 7200-rpm
1-TB, 7200-rpm, 3.5-inch
1-TB, hybrid SSD, 2.5-inch
500-GB, 7200-rpm
500-GB, hybrid SSD, 2.5-inch
500-GB, 5400-rpm, 2.5-inch, FIPS
500-GB, 2.5-inch, self-encrypting (SED)
500-GB, 7200-rpm, 3.5-inch
256-GB Solid-state Drive (SSD), self-encrypting (SED)
256-GB Solid-state Drive (SSD)
180 GB Solid-state Drive (SSD)
128-GB Solid-state Drive (SSD), self-encrypting drive (SED)
30
Chapter 4 Removal and replacement procedures – Microtower (MT) chassis
Advertisement
Table of Contents
