Table of Contents
Advertisement
TEMPERATURE
CONTROLLED
"HI-POWER"/"MULTI-POWER"
COOKING
AND AUTOMATIC
"HOLD
WARM"
The "Temperature
Controlled
Meat Cooking Guide" and "Reheating
Guide" on Pages 17 and 18 will show you
which multi-power
setting and temperature
setting are recommended
for the food you are cookng.
When cooking with the temperature
control settings,
the timer is not used.
I. Place the temperature
probe into the
food with the first inch of the
sensor in the center of the food.
-_.
,
__
__,"_
The probe should be in a
level direction or on an
angle as shown. It should
NOT
be put in from
a°"
the top.
2. Plug the temperature
probe into the socket on
the side of the oven.
CAUTION:
Do not
plug the pointed end of
the temperature
probe
into the socket.
When you touch "7" and "0" the
display window will show "70".
This means that in the "70
(ROAST)"
setting, the oven is at
power level 70.
NOTE: You do not need to touch MICRO POWER
when you are cooking with HI (max power). To set
"HI-POWER"
Cooking, skip steps 6 and 7 above.
However,
if MICRO POWER is touched,
the light
above MICRO will go on and the word "HI" will show
in the display window. This is to tell you that the oven
will work at HI (highest microwave
power) unless a
different power setting is chosen.
3. Touch CLEAR.
4. Touch MICRO TEMP.
The lights above TEMP and
MICRO, below COOK
I will
go on, and "F" will show in
the display window.
5. Choose the food temperature
and touch the corresponding
numbers.
For example, if the
recipe calls for doneness
at
165 ° F, you would touch
numbers
"i .... 6" and "5".
When you touch "165", the
display window will show
"165F". If the temperature
probe is not plugged into the
socket,
the word "Prob" will
flash and the oven will not
work.
_
F-_7 F-_-I
6. Touch MICRO POWER.
The word "HI" will show in
the display window until you
enter a lower power setting.
This is to remind you that the
oven will always operate
at full
power unless you set a lower
power.
7. Choose the power control
setting you desire and touch
the corresponding
numbers.
For example, if the recipe
should call for cooking at the
"70 (ROAST)"
setting, you
would touch numbers "7" and
"0".
_F-_
CE3C}E3UK3
......... _
F-_-7
CBE3_U_
C_3_CK3
_UK3
8. Touch START. The oven will
_Z3
begin to cook and you will be
able to see the temperature
of
the food rising in the display
window.
.
I0.
A tone will sound for one
second when the temperature
is reached.
The oven will
switch into "Hold Warm" to
keep the food warm.
The micro control setting auto-
matically changes
to "power
level I". The display window
will show "Hold".
To be sure the correct tempe-
rature is being held, you may
touch MICRO TEMP.
The "holding" temperature
will show in the display
window.
The "Hold Warm" will
continue for 60 minutes after
the food reaches the chosen
temperature
or until the door
has been opened or until
STOP has been touched.
If
the door has been opened,
the "Hold Warm" will stop. To
reset, simply touch MICRO
TEMP, the corresponding
numbers and START.
NOTE: The highest temperature
that can be set is 185° F.
_E]UE]CE3
CK3F-_CE]
F-_TUK3UK3
_
F-07 _
19
Advertisement
Table of Contents
