Table of Contents
Advertisement
RECALL
AND CHANGE
OF SETTINGS
To Recall a Setting
To recall (check) a setting before you start the oven, follow the directions
below.
® To check the Setting for a given stage, touch MEMORY/RECALL
once or more until the correct
Stage Light and Indicator Light turn on. The set Time, Temperature
or Oven Temperature
for that
stage will show in the display window.
• To check the Microwave Cooking Power level, touch MICRO POWER.
® To check the Oven Temperature,
touch OVEN TEMP/PREHEAT.
To recall (check) a setting while the oven is operating,
follow the directions
below.
® To check settings while the oven is operating,
touch the desired pad to recall the setting for the
operating
stage.
o To recall a future stage, touch STOP, follow the directions
above for recalling (checking) a setting
before starting the oven, and then touch START to continue cooking.
e To recall TIME OF DAY while the oven is running, touch TIME OF DAY. It will show momentarily
in the display window.
To Change a Setting
Recall the Setting to be changed
by following directions
above and make the change as follows:
TIME ................................................................
Touch "0" until only one "0" shows in
(MICRO TIME, CONVEC
TIME, MICRO/CONVEC
TIME)
the Display Window. Set Cooking
Time.
TEMPERATURE
CONTROL
......................................
Set Cooking Probe Temperature.
(MICRO TEMP, CONVEC
TEMP, MICRO/CONVEC
TEMP)
MICRO POWER ....................................................
Set Microwave
Cooking Power Level°
To reset to "HI", set "99".
OVEN TEMP/PREHEAT
...........................................
Set Oven Temperature.
PAUSE
BETWEEN
STAGES
Some recipes require placing or removing of ceramic tray, stirring, turning and adding or removing of foods
between stages. To set the oven to stop between
stages, touch PAUSE rather than MEMORY/RECALL
when setting the oven. If pause is set, the oven will automatically
stop.
After the pause, to restart the oven, touch START.
REGULAR
TIMER
Your Oven also has a timer that can be used for non-cooking
functions. When used as a regular timer, the
Oven is not running. The timer is simply counting down in seconds.
For detailed insturctions
on using this timer, see below.
To use the Ragular
Timer
feature:
I. Touch CLEAR.
2. Touch MICRO TIME.
3. Touch numbers
for the time.
4. Touch MICRO POWER.
5. Touch "0" (power level 0)
6. Touch START. The time will begin counting
down in the display window with no cooking or heating in
the oven.
A tone will sound and the word "End" will show in the display window for 2 seconds
when the time is
over.
13
Advertisement
Table of Contents
