Sears Kenmore 87561 Use & Care Manual page 15

Micro/convection oven
Table of Contents

Advertisement

HI-POWER
/ MULTI-POWER
COOKING
"HI" gives the highest power cooking possible with your oven. It is the recommended
setting for cooking foods with high
moisture
content
or for cooking foods that need fast cooking to maintain their natural flavor and texture.
Many foods
need slower cooking (at less than full power) in order to give you the best results. In addition to "HI" there are ninety-nine
multi-power
settings. The cookbook
tells you which power setting is recommended
for the food being cooked.
To Cook
1. Touch CLEAR, and a beep tone will be heard. The
CLEAR erases all previous settings.
2. Touch MICRO TIME. The lights above TIME and
MICRO, below COOK I will go on. ("0" will show in
the display window.)
3. Touch the correct numbers
on the control panel to
set the cooking time. The time set will show in the
display window at the top of the control panel. For
example:
o To set 30 seconds,
you would touch "3" and then
• To set 3 minutes, touch "3", "0" and "0".
• To set 3-1/2 minutes, touch "3", "3" and "0".
Remember,
the timer is a digital clock that is divided
into 60 seconds.
Therefore,
1/2 minute is equal to 30
seconds.
Touch 30 and not 50 as with a calculator
to
indicate 1/2.
4. Touch MICRO POWER. The lights above MICRO
and below COOK I will go on. Also, the word "HI"
will show in the display window until a lower setting
is entered.
This is to tell you that the oven will be
operating
on "HI" unless a different power setting is
chosen.
5. Touch numbers
for desired cooking power level. For
example,
if the recipe calls for cooking at the "20
(LOW)" setting, you would touch "2" and "0". The
display window will show "20". This means that in
the LOW setting, the oven is cooking at power level
20.
EXAMPLE:
To warm 4 doughnuts,
you would cook at
power level 80 or "80 (REHEAT)" for 35 seconds. To
do this, follow these six steps.
1. Touch CLEAR.
2. Touch MICRO TIME.
3. Set 35 seconds
by touching
"3" and then "5". "35" will
show in the display window.
-"-a'J.,- rd. r t._,_
.... rT_
c_E3r_q_
E_3
{Ez3_3o[3
_E_3E_3
_ ':_: ,.%.,L _ ._.--.
4. Touch MICRO POWER.
The display window will show
"HI".
5. Choose the "80 (REHEAT)"
{EK3{Z_3
setting by touching the num-
bers "8" and "0". The display
window will show "80". This
means the oven is cooking at
power level 80.
_O_3C3S3
_E_E3{SK3
NOTE:
It is not necessary
to touch MICRO POWER
when cooking with the highest power ("HI"). To set
"HI-POWER"
cooking, skip steps 4 and 5 above.
However,
if MICRO POWER is touched, the light
above MICRO will go on and the word "HI" will show
in the display window. This is to let you know that the
oven will be operating
on "HI" power unless a different
power setting is chosen.
6. Touch START. The oven begins to cook and the
display window will show the time counting
down. A
tone will sound and the word "End" will show in the
display window for two seconds
when the cooking
time is completed.
Then the oven will shut itself off.
6. Touch START. The oven be-
gins to cook and the time will
begin to count down in the
display window.
A tone will sound and the
word "End" will show in the
display window for 2 seconds
when the 1-I/2 minutes are
over. Then the oven will shut
itself off.
_r--_q
......._{2E3
15

Advertisement

Table of Contents
loading

Table of Contents