Connection Examples - Yamaha MT3X Operation Manual

® MONITOR OUT L and R Jacks
These jacks deliver a line-level version of the same
signal that appears at the PHONES jack, and thus
the signal can be selected using the PHONES SE¬
LECT switch. The MONITOR OUT level is con¬
trolled by the PHONES control. The MONITOR
OUT jacks can be used to feed a power amp/
speaker system for open-air (i.e. non-headphone)
monitoring.
® POWER Switch
Press the POWER switch once to turn power ON, a
second time to turn power OFF.
r
NOTE; --
If you are familiar with block diagrams of electronic
equipment, refer to the "BLOCK DIAGRAM" on page
28 for a full overview of the MT3X system.
CONNECTION EXAMPLES
— BASIC CONNECTIONS —
Stereo cassette deck
External effect unit mixdown
-
13
-