Table of Contents
Advertisement
Door seal
Clean with a damp cloth when necessary.
Check the condition of the door seal periodically.
Water supply hose
Check the supply hose regularly for brittleness and cracks and replace it if
necessary using a new hose of the same type (available from After-Sales
Service or specialist dealer).
Mesh filter for water connection
Check and clean regularly.
For washing machines with an inlet hose as
shown on pictures .
1.
Close the tap and loosen the inlet hose on the tap.
2.
Clean the internal mesh filter and screw the water
inlet hose back onto the tap.
3.
Now unscrew the inlet hose on the rear of the
washing machine.
4.
Pull off the mesh filter from the washing machine
connection with universal pliers and clean it.
5.
Refit the mesh filter and screw the inlet hose on again.
6.
Turn on the tap and ensure that the connections are
completely water-tight.
10 TROUBLESHOOTING GUIDE
Depending on the model, your washing machine is equipped with
various automatic safety functions. This enables faults to be
detected in good time and the safety system can then react
appropriately. These faults are frequently so minor that they can
be resolved within a few minutes.
The washing machine will not start.
Check whether:
The mains plug is inserted into the socket.
The wall socket is functioning correctly (use a table lamp or similar
appliance to test it).
The door is properly closed .
The "Start/Pause" button has been pressed.
25
Advertisement
Table of Contents
