Care & Cleaning; Storage Guide - FoodSaver FM2000-FFP Owner's Manual

Care & Cleaning
of your Vacuum Sealer
To Clean Appliance:
Remove Power Cord from electrical outlet. Do not immerse in liquid.
Check Gaskets and around Drip Tray to make sure they are free from
food materials. Wipe off Gasket with warm soapy cloth if needed.
Upper and Lower Gaskets may be removed for cleaning. Clean with
warm, soapy water and allow Gaskets to dry before reinserting in
machine.
The Removable Drip Tray makes cleanup easy when small amounts of
liquids are pulled into the Vacuum Channel during vacuum process.
Empty Drip Tray after each use. Wash in warm soapy water or place
on top rack of dishwasher. Check for food residues in Drip Tray Slot.
Clean if needed. Dry thoroughly before reinserting into appliance.
11 US: www.FoodSaver.com | CA: www.FoodSaver.ca | MX: www.oster.com.mx/foodsaver
VS1200_22EFSM1 (WITHOUT NOM Mexico compliance).indd 11-12 VS1200_22EFSM1 (WITHOUT NOM Mexico compliance).indd 11-12
Remove all food around gaskets
Lift Drip Tray out

Storage Guide

of your Vacuum Sealer
To Store Appliance:
Clean unit thoroughly as detailed in "Care & Cleaning" section.
After the unit has been cleaned and allowed to fully dry, close lid
without locking and slide the Store Button to the Store position.
This setting will keep the lid closed but prevents any undue
pressure from being applied to the internal sealing gaskets of the
unit.
Never store lid in Operate position as gaskets may become
compressed and the unit may not function properly.
Store Vertically
Once in Store position, store vertically to save valuable kitchen
space.
Consumer Service: US: 1-877-777-8042 CA: 1-877-804-5383 MX: +52 55 5366 0800
Slide button to Store position.
12
2022/10/14 下午4:03 2022/10/14 下午4:03