Download Print this page
Hide thumbs Also See for FM2400 Series:

Advertisement

Available languages

Available languages

Quick Links

FM2400 SERIES QUICK START GUIDE
MAKE A FOODSAVER
1. Open Appliance Lid and
place roll into Roll Storage.
2. Lift up Roll Cutter Bar and
place bag material beneath
the Cutter Bar. Pull out
enough bag material to
hold item being vacuumed
sealed, plus 3 inches (7.62
centimeters). Lower the Roll
Cutter Bar and slide Bag
Cutter across Cutter Bar.
3. Move Easy Lock Latch to
the Open position. Open
Appliance Lid. Insert one
end of bag material across
Sealing Strip.
4. Close lid and turn Easy Lock
Latch to Operate position.
5. Press Seal Button.
6. When Seal Indicator
Light turns off, sealing is
complete. Turn Latch to
Open position, lift lid and
remove bag.
VACUUM SEAL FOODSAVER
ZIPPER BAGS:
1. Prepare zipper bags
according to FoodSaver
Accessory Guidelines,
which are included with
accessory purchases. For
zipper bags, make sure
not to put any food under
the valve and press zipper
closed with finger while bag is lying down on a flat
surface.
2. Turn Latch to Operate position.
3. Insert one end of the Accessory Hose into Accessory
Port on Appliance until it clicks into place. Place
Handheld Sealer on zipper bag valve.
4. Press Vacuum & Seal Button.
Zipper bags are safe for pantry and fridge use only.
p. 1
FM2400_22EFSQSG1 (digital) QSG.indd 1
FM2400_22EFSQSG1 (digital) QSG.indd 1
HOW TO:
BAG:
®
Place Bag on Sealing Strip
Operate
Store
Open
Close and turn Easy Lock Latch to
Operate position
Press Seal Button
®
®
VACUUM SEAL A FOODSAVER
1. Place item(s) in bag, allowing
at least 3 inches (7.62 cm) of
space between bag contents
and top of bag.
2. Open Appliance Lid and place
open end of bag into Vacuum
Channel (Drip Tray).
3. Close lid and turn Easy Lock
Latch to Operate position.
4. Press Vacuum & Seal Button
to begin vacuum and sealing
process. Motor will continue to
run until bag is fully vacuumed,
then will automatically seal.
5. When Seal Indicator Light
turns off, turn Latch to Open
position, lift lid and remove
bag.
Refrigerate, freeze or store as
needed.
VACUUM SEAL FOODSAVER
CONTAINERS:
(sold separately)
1. Prepare FoodSaver
Preserve
®
& Marinate Container
according to Guidelines, which
are included with container
purchase.
2. Turn Latch to Operate
position.
3. Insert one end of Accessory
Hose into Accessory Port on
Appliance. Place Handheld Sealer on container valve.
4. Press Vacuum & Seal Button.
To release vacuum and open, turn knob on lid to Open.
See Owner's Manual for full instructions and safeguards.
Français
Español
p. 2
p. 3
BAG:
®
Place Bag in Vacuum Channel
Operate
Store
Open
Close and Latch Lid
Press Vacuum & Seal Button
®
2022/3/15 下午4:51
2022/3/15 下午4:51

Advertisement

loading

Summary of Contents for FoodSaver FM2400 Series

  • Page 1 Français Español FM2400 SERIES QUICK START GUIDE p. 2 p. 3 HOW TO: MAKE A FOODSAVER BAG: VACUUM SEAL A FOODSAVER BAG: ® ® 1. Open Appliance Lid and 1. Place item(s) in bag, allowing place roll into Roll Storage.
  • Page 2 Español GUIDE DE DÉMARRAGE RAPIDE SERIES FM2400 p. 1 p. 3 COMMENT… METTRE UN SAC FOODSAVER FAIRE UN SAC FOODSAVER SOUS VIDE : 1. Ouvrez le couvercle de l’appareil et placez le rouleau 1. Placer le ou les articles dans le de pellicule à...
  • Page 3 English Français GUÍA DE INICIO RÁPIDO DE LA SERIE FM2400 p. 1 p. 2 CÓMO HACER UNA BOLSA FOODSAVER SELLAR AL VACÍO UNA BOLSA ® FOODSAVER ® 1. Abra la tapa del aparato y coloque el rollo en el 1. Coloque los artículos en la Almacenamiento de rollo.