Beko VRR 83314 VB User Manual page 12

4 Installation
2- Install the charging station.
Install the adaptor plug to the charging station and set the cables up to prevent the adaptor cable from
wrapping around the machine during vacuuming.
C
Install the charging station in a location where it can easily be accessed by the vacuum
cleaner. Install the charging station on a hard and level ground rather than a carpet.
To ensure a smooth operation of the robot, it is advised that no obstacles are present within 1.5 m on
the front and within 0.5 m on the left and right sides.
C
Always keep the charging station plugged, otherwise the robot vacuum cleaner cannot
return to the charging station automatically.
C
For a smooth charging operation, do not move the charging station. When the location is
changed, it may delete the available map and create a new map due to the positioning error.
12 / EN
Robot Vacuum / User Manual