Table of Contents
Advertisement
08
Quick Start
Starting an Energy Logger
1.
Insert the supplied batteries in logger, observing the
correct polarity.
2.
Press any of the loggers three buttons to wake it up.
Select the wiring configuration to be monitored
by pressing the function button.
3.
Follow the on-screen prompts and plug in the current
coils and mains lead as directed.
4.
Clip the current coils around the appropriate conductors.
The logger will self configure.
•
If monitoring three-phase current and voltage, adjust the
position of the coils if directed to do so (see page 17 for
further information).
5.
Read values directly from the logger's display,
pressing the scroll button to view different
properties.
Or
6.
Press the data logging button to start it
recording.
Viewing Recorded Data
•
Follow the instructions on page 28 to download and
install the Tinytag Explorer software.
7.
Connect the logger to the computer using the USB
cable.
•
Click the Get Data button in the software.
For more in-depth information on all of the above, please
see the following pages.
12
1
3
4
6
2
3
5
7
13
Advertisement
Table of Contents
