Table of Contents
Advertisement
14
Tinytag Explorer
Configuring an Energy Logger
To configure an energy logger, to change how often a
unit records, or to clear old readings from a unit, click the
Configure icon:
The first time you start a data logger, you will be presented
with the Basic Settings view.
Once you have entered a description for your logging run,
and set the logging interval, the data logger will be ready to
use. Click the Configure button to start recording.
Should you need to change further settings in the data
logger, click the Advanced Settings button.
Advanced Settings
To change an option on the Advanced Settings page, you will
need to click on the
icon next to the option.
Logging Description
The logging description is a text label that is stored in the
data logger. This is shown as title on the recorded data when
it is downloaded from the logger .
(cont.)
32
Logging Interval
The Logging Interval option enables you to set how often
an energy logger will record (the minimum interval is 30
seconds).
overwrite
Overwrite allows you to chose what happens when a logger
fills its memory.
If Run indefinitely is selected, the logger will overwrite its
oldest readings when it fills its memory, meaning that only
the most recent data recorded will be retained.
If Suspend logging is selected, the logger will stop recording
when full and preserve the data it has already stored.
Clear old Readings
Clear Old Readings allows you to configure an energy logger
without losing the data already stored on it.
Selecting Clear old readings now will wipe the logger.
Configure
Once you have set up your logger as you wish it to record,
click the Configure button.
Do not disconnect the logger until software tells you it is
safe to do so.
Further Information
Further information on how to use Tinytag Explorer can
be found in the software's Help file by going to help and
Contents.
33
Advertisement
Table of Contents
