Table of Contents
Advertisement
19
Physical Specification
Logger
operational Temperature Range
Maximum humidity
Maximum Altitude
For indoor use only!
Pollution Degree
Case Dimensions
Length
Width
Depth
Weight
(Including batteries)
Coils
Coil Thickness (Diameter) 8mm
Internal Loop Diameter
ACS-0020
ACS-0021
ACS-0022
Cable Length
Weight
ACS-0020
ACS-0021
ACS-0022
PC Connection
*The loop diameter of the ACS-0022 coil can be minimised
by fitting a cable tie around the lower part of the coil, once it
has been clipped around a conductor.
0 to +50°C
95% (non-condensing)
3,000m
IEC61010:2001
Pollution degree 2
195mm
102mm
50mm
600g
85mm (typical)
175mm (typical)
38mm (typical)*
1m
72g
125g
100g
USB
40
20
Maintenance & Service Instructions
Maintenance
Energy loggers can be cleaned as follows:
1.
Remove all leads and cables from the logger.
2.
Wipe the case with a moist cloth using a mild
detergent.
3.
Allow to dry.
4.
Do not allow liquids to enter the case or connectors.
5.
Do not use abrasive materials or solvents.
Service Instructions
Users can only replace the 4 x 1.5V AA alkaline batteries.
There are no other user-serviceable parts in this data logger
and the case should not be opened except to remove the
battery cover when replacing batteries.
1.
Remove all leads and cables from the logger.
2.
Remove the battery cover from the back of the
data logger using a Philips screw driver.
3.
Remove the old batteries from the logger.
4.
Fit the new batteries in
the logger, taking care
to observe the correct
polarity.
5.
Press one of the buttons
on the front of the logger
to check it powers up.
6.
Re-fit the battery cover to
the logger.
4
41
Advertisement
Table of Contents
