Battery Charger; Hdd Kit (Serial-Ata) - Toshiba Portege M400 User Manual

Battery Charger

The battery charger provides a convenient way to charge battery packs
without requiring the use of your computer. The battery charger holds up to
two battery packs (lithium ion).

HDD Kit (Serial-ATA)

An extra hard disk drive expands the flexibility of your system and lets you
carry your data without carrying the computer.
Use a size 1 Phillips screwdriver.
Removing the hard disk drive pack
To remove the hard disk drive pack, follow the steps below.
1. Set the computer to boot mode and turn off the power.
2. Disconnect the AC adaptor and all external cables connected to the
computer.
3. Turn the computer upside down and remove the battery pack. Refer to
Replacing the battery pack
Modes, for details.
4. Loosen two screws securing the hard disk drive cover.
5. A small row of ridges marks the latches securing the cover. Press on
these ridges until you hear a click.
6. Press on the arrows and lift the cover up and out to remove it.
Hard disk
drive cover
7. Reposition the hard disk drive until it is vertical.
User's Manual
section in Chapter 6, Power and Power-Up
Removing the hard disk drive cover
Optional Devices
Screws
8-17